User Interface

Button Functionality

Home/Cancel

  • Displays the home screen (when on an information screen or in menu)

  • Cancels the current selection without saving (when editing a setting)

Alarm

  • Displays the alarm screen with all currently active alarms

Run/Reset

  • Press to cycle run/pause

  • Press and hold to reset the current dose cycle

Screen Left/Right

  • Cycles through the various information screens (when on the home screen)

  • Right arrow enters submenus (when in menu)

  • Selects the character or digit (when editing certain settings)

Select/Save

  • Enters the menu (when on the home screen)

  • Selects a setting to edit or submenu to enter (when in a menu)

  • Saves the current setting (when editing a setting)

Information Screens

From the home screen, pressing the left and right buttons cycles through the information screens.

Dose Info

Describes the current state of the FLORATek control with some additional details.

Solution Levels

When consumption tracking is enabled, this screen illustrates the current approximate solution levels inside of your containers.

Pump Assignments

Provides a quick reference for your current pump configuration.

About

Provides information about your FLORATek 4 control along with diagnostic information.

2-hour EC Graph

A quick-reference graph of the measured EC for the past 2 hours. Each pixel along the x-axis represents approximately one minute. The dotted line represents your current EC setpoint.

2-hour pH Graph

A quick-reference graph of the measured pH for the past 2 hours. Each pixel along the x-axis represents approximately one minute. The dotted line represents your current pH setpoint, with a y-axis range of +/-2pH.

24-hour EC Graph

A quick-reference graph of the measured EC for the past 24 hours. Each pixel along the x-axis represents approximately 12 minutes. The dotted line represents your current EC setpoint.

24-hour pH Graph

A quick reference graph of the measured pH for the past 24 hours. Each pixel along the x-axis represents approximately 12 minutes. The dotted line represents your current pH setpoint, with a y-axis range of +/-2pH.